Beep Sounds

Seat Belt Warning Beep

If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds.

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.

Refer to Seat Belt Warning Light/Beep on.

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.

Tire Inflation PressureWarning Beep

* Some models.

The warning beep sound will be heard for about 3 seconds when there is any abnormality in tire inflation pressures.

    See also:

    The Inside
    Because of its preproduction status, Mazda warned that there might be some imperfect trim pieces in the cabin, but our CX-9 held up well to our scrutiny. Sport models have cloth seats, and the fir ...

    Changing a Flat Tire
    NOTE: If the following occurs while driving, it could indicate a flat tire. - Steering becomes difficult. - The vehicle begins to vibrate excessively. - The vehicle pulls in one direction. If yo ...

    Front Seat Belt Pretensioner and Load Limiting Systems
    For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt pro ...