Push-Starting

Do not push-start your Mazda.

NOTE:
You can't start a vehicle with an automatic transaxle by pushing it.

    See also:

    Beep Sounds
    qSeat Belt Warning Beep If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds. If the driver's seat belt ...

    Automatic Transaxle Fluid (ATF)
    Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. The volume of fluid changes with temperature. Fluid m ...

    SeatWarmer
    The driver and passenger seats can be warmed by rotating the applicable seat warmer dial while the ignition is switched ON. The seat temperature increases as the number on the dial increases. W ...