Accessory Sockets

The ignition switch must be in the ACC or ON position.

Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).

The accessory socket is in the center console.

Type A
Type A

Type B
Type B

CAUTION:
To prevent accessory socket damage or electrical failure, pay attention to the following:
more than 120 W (DC 12 V, 10 A). Do not use accessories that require
more than 120 W (DC 12 V, 10 A).

genuine Mazda accessories or the Do not use accessories that are not
genuine Mazda accessories or the equivalent.

socket is not in use to prevent Close the cover when the accessory
socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.

accessory socket. Correctly insert the plug into the
accessory socket.

into the accessory socket. Do not insert the cigarette lighter
into the accessory socket.

Noise may occur on the audio playback or TV reception depending on the device connected to the accessory socket.

NOTE:
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.

    See also:

    Highway Driving
    On the highway is where you'll notice you're driving a small, light car, and that's not always a great thing. Right off, there was fair amount of road noise, and passengers noticed a lot of wind n ...

    SRS Air Bag Deployment Criteria
    This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative case of collisions.) X: The SRS air bag equipment ...

    Seat Belt (Except Center-Rear Position)
    NOTE: When using the center-rear seat belt, refer to “Center-Rear Position Seat Belt”. Fastening the Seat Belt 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt. 3. Insert the to ...