Rear Window Wiper and Washer
The ignition switch must be in the ON position.
Rear WindowWiper
Turn the wiper on by turning the rear wiper/washer switch.
ON ― Normal.
INT ― Intermittent.
Rear WindowWasher
To spray washer fluid, turn the rear wiper/
washer switch to the 
position. After
the switch is released, the washer will
stop.
If the washer doesn't work, inspect the fluid level. If it's OK and the washer still doesn't work, consult an Authorized Mazda Dealer.
See also:
Fuel-Filler Lid and Cap
WARNING:
When removing the fuel-filler cap,
loosen the cap slightly and wait for any
hissing to stop. Then remove it:
Fuel spray is dangerous. Fuel can
burn skin and eyes and cause illness
if in ...
Turn and Lane-Change Signals
Turn Signal
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues t ...
Seat Belt Pretensioner and Load Limiting Systems
For optimum protection, the driver and
passenger seat belts are equipped with
pretensioner and load limiting systems.
For both these systems to work properly
you must wear the seat belt properly.
...