Beep Sounds

Seat Belt Warning Beep

If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds.

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.

Refer to Seat Belt Warning Light/Beep on.

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.

Tire Inflation PressureWarning Beep

* Some models.

The warning beep sound will be heard for about 3 seconds when there is any abnormality in tire inflation pressures.

    See also:

    Human-Machine Interface now easier to Use
    The facelift model has been upgraded with a newly-evolved human-machine interface system (HMI), now with instruments that are easier to use. The numbers in the driver instrumentation are larger an ...

    Ignition Switch
    Ignition Switch Positions LOCK The steering wheel locks to protect against theft. Only in this position can the key be removed. Manual transaxle To turn the key from the ACC to the LOCK posit ...

    Convenient Use of the Hands-Free System
    Phone book usage Phone book registration Phone numbers can be registered to the Bluetooth Hands-Free phone book. 1. Activate the Bluetooth Hands-Free. 2. Say: [Beep] “Phone book”. 3. Prompt: “Se ...