Audio Control Switch Operation (Steering Wheel)

When the audio unit is turned on, operation of the audio unit from the steering wheel is possible.

NOTE:
Because the audio unit will be turned off under the following conditions, the switches will be inoperable.

- When the ignition switch is turned to the LOCK position.

- When the power button on the audio unit is pressed and the audio unit is turned off.

- When the CD being played is ejected and the audio unit is turned off.

NOTE:


NOTE:
Mazda has installed this system to prevent distraction while driving the vehicle and using audio controls on the dashboard.

Always make safe driving your first priority.

Adjusting the Volume

To increase the volume, press the volume


To increase the volume, press the volume button (+).

To decrease the volume, press the volume button (-).

Changing the Source

Press the mode switch () to


Press the mode switch (change) to
change
the audio source (FM1 radio> FM2 radio> AM radio> CD player or CD changer> SIRIUS1> SIRIUS2> SIRIUS3> AUX> cyclical).

NOTE:
CD, CD changer and SIRIUS digital satellite radio modes cannot be selected in the following cases:
· CD, CD changer, or SIRIUS digital satellite radio unit is not equipped on the audio system.

· CD has not been inserted.

Connect a portable audio unit or similar product on the market to the auxiliary jack to listen to music or audio over the vehicle's speakers. Change the audio source to AUX mode.

Seek Switch

When listening to the radio or SIRIUS


When listening to the radio or SIRIUS digital satellite radio

Press the seek switch (the radio,the radio),
the radio
switches to the next/previous stored station in the order that it was stored (1―6).

Press the seek switch (for about 2,for about 2)
for about 2
seconds until a beep sound is heard to seek all usable stations at a higher or lower frequency whether programmed or not.

When playing a CD

Press the seek switch (skip to the) to
skip to the
next track.

Press the seek switch (repeat the) to
repeat the
current track.

Mute Switch

Press the mute switch (to mute) once
to mute
audio, press it again to resume audio output.

NOTE:
If the ignition switch is turned to the LOCK position with the audio muted, the mute will be canceled.

Therefore, when the engine is restarted, the audio is not muted. To mute the audio again, press the mute switch (

).


AUX Mode (Auxiliary input)


    See also:

    Type Approval of Equipment
    Immobilizer system Keyless entry system ...

    Hazard Warning Flasher
    The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that the ...

    Interior
    Each Tribute carries five people on twin bucket seats up front and a three-place, 60/40-split, folding rear seat. Tributes have a floor-mounted gearshift, and the standard 100-watt CD stereo can f ...