Accessory Sockets
The ignition switch must be in the ACC
or ON position
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
Front (Type A)
Front (Type B)
Rear
CAUTION.
To prevent accessory socket damage
or electrical failure, pay attention to
the following:
Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
Close the cover when the accessory
socket is not in use to prevent
foreign objects and liquids from
getting into the accessory socket.
Correctly insert the plug into the
accessory socket.
Noise may occur on the audio playback or TV reception depending on the device connected to the accessory socket.
NOTE.
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.
See also:
Driving on Uneven Road
Your vehicle's suspension and underbody can be damaged if driven on
rough/uneven roads
or over speed bumps at excessive speeds. Use care and reduce speed when
traveling on
rough/uneven roads or ...
Tire Labeling
Federal law requires tire manufacturers to place standardized information on
the sidewall of
all tires. This information identifies and describes the fundamental
characteristics of the tire
and ...
When Warning Indicator/Beep is Activated
Under the following conditions, warning beeps are heard and a
warning/indicator light in
the instrument cluster illuminates to notify the driver of improper operation of
the
advanced key to prev ...


