Rear WindowWiper and Washer
The ignition switch must be in the ON position.
Rear WindowWiper
Turn the wiper on by turning the rear wiper/washer switch.
ON - Normal.
INT - Intermittent.
Rear WindowWasher
To spray washer fluid, turn the rear wiper/
washer switch to the 
position. After
the switch is released, the washer will
stop.
If the washer doesn't work, inspect the fluid level. If it's OK and the washer still doesn't work, consult an Authorized Mazda Dealer.
See also:
Cruise Control
With cruise control, you can set and
automatically maintain any speed of more
than about 32 km/h (20 mph).
WARNING:
Do not use the cruise control under the
following conditions:
Using the cruise ...
Flat Tire
Either run-flat tires or conventional tires
are equipped on your Mazda depending
on the specification, therefore the
procedure for repairing a flat tire differs
depending on the type of tire. Befo ...
Owner Maintenance Precautions
Improper or incomplete service may result in problems. This section gives
instructions only
for items that are easy to perform.
As explained in the Introduction, several procedures can be done onl ...