Tiedown Hook

CAUTION:
Don't use the tiedown hook under the rear for towing.

It is designed ONLY for tying down the vehicle when it's being transported. Using it for towing will damage the bumper.

Tiedown Hook-Front

1. Remove the tiedown eyelet and the lug wrench from the trunk.

2. Wrap the lug wrench with a soft cloth


2. Wrap the lug wrench with a soft cloth to prevent damage to the bumper and open the cap located on the front bumper.

CAUTION:
The cap cannot be completely removed. Do not use excessive force as it may damage the cap or scratch the painted bumper surface.

3. Securely install the tiedown eyelet


3. Securely install the tiedown eyelet using the lug wrench.

4. Hook the tying rope to the tiedown


4. Hook the tying rope to the tiedown eyelet.

CAUTION:
If the tiedown eyelet is not securely tightened, it may loosen or disengage from the bumper when tying down the vehicle. Make sure that the tiedown eyelet is securely tightened to the bumper.

    See also:

    Customer Assistance (Mexico)
    Your complete and permanent satisfaction is our business. We are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition. If ...

    Starting the Engine
    NOTE: Engine-starting is controlled by the spark ignition system. This system meets all Canadian Interference- Causing Equipment Standard requirements regulating the impulse electrical field stre ...

    Exterior
    Thanks to an arcing black garnish atop the air dam, the Mazda2 carries the smiling expression Mazda has recently affixed to most of its cars. The lower air dam dominates the Mazda2's nose; a thin ...