Starting a Flooded Engine
If the engine fails to start, it may be flooded (excessive fuel in the engine).
Follow this procedure: 1. If the engine does not start within five seconds on the first try, turn the key to the LOCK position, wait ten seconds and try again.
2. Depress the accelerator all the way and hold it there.
3. Turn the ignition switch to the START position and hold it there―for up to ten seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up.
4. If the engine fails to start, crank it without depressing the accelerator―for up to ten seconds.
If the engine still does not start using the above procedure, have your vehicle inspected by an Authorized Mazda Dealer.
See also:
Mazda MX-5 2011
Editor's note: This review was written in October 2010 about the 2010 Mazda
MX-5 Miata. Little of substance has changed with this year's model. To see
what's new for 2011, click here, or check out ...
Operating Tips for Audio System
WARNING:
Do not adjust the audio control
switches while driving the vehicle:
Adjusting the audio while driving the
vehicle is dangerous as it could
distract your attention from the
vehicle opera ...
Seat Belt Pretensioner and Load Limiting Systems
For optimum protection, the driver and
passenger seat belts are equipped with
pretensioner and load limiting systems.
For both these systems to work properly
you must wear the seat belt properly.
...