Starting a Flooded Engine

If the engine fails to start, it may be flooded (excessive fuel in the engine).

Follow this procedure:
1. If the engine does not start within five seconds on the first try, turn the key to the LOCK position, wait ten seconds and try again.

2. Depress the accelerator all the way and hold it there.

3. Turn the ignition switch to the START position and hold it there―for up to ten seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up.

4. If the engine fails to start, crank it without depressing the accelerator―for up to ten seconds.

If the engine still does not start using the above procedure, have your vehicle inspected by an Authorized Mazda Dealer.

    See also:

    Specifications
    Engine Electrical System *1 ex factory CAUTION. When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged. ...

    Cabin environment - sense of oneness between car and driver
    Aboard the all-new Mazda 3 is a new Human Machine Interface that contributes to the sense of oneness between the car and driver. The cabin interior is designed to allow the driver to concentrate o ...

    HomeLink Wireless Control System
    NOTE: HomeLink and HomeLink house are registered trademarks of Johnson Controls. The HomeLink system replaces up to 3 hand-held transmitters with a single builtin component in the auto-dimming ...