Steering Wheel

WARNING.

Never adjust the steering wheel while the vehicle is moving:
Adjusting the steering wheel while the vehicle is moving is dangerous.

Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident.

Steering Wheel Adjustment

To change the angle or length of the steering wheel:

1. Stop the vehicle, pull up the lock


1. Stop the vehicle, pull up the lock release lever under the steering column.

2. Tilt the steering wheel and/or adjust the steering column length to the desired positions, push the lever down to lock the column.

3. Push the wheel up and down to be certain it's locked before driving.

    See also:

    Spare Tire and Tool Storage
    Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. 5 Door (Type A) (Type B) Jack To remove the jack 1. Turn the knob and remove the ...

    Accessory Sockets
    The ignition switch must be in the ACC or ON position. Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A). The accessory socket is in the center ...

    Fuses
    Your vehicle's electrical system is protected by fuses. If any lights, accessories, or controls don't work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will ...