Starting a Flooded Engine
If the engine fails to start, it may be flooded (excessive fuel in the engine).
Follow this procedure:
1. If the engine does not start within five
seconds on the first try, turn the key to
the LOCK position, wait ten seconds
and try again.
2. Depress the accelerator all the way and hold it there.
3. Turn the ignition switch to the START position and hold it there―for up to ten seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up.
4. If the engine fails to start, crank it without depressing the accelerator―for up to ten seconds.
If the engine still does not start using the above procedure, have your vehicle inspected by an Authorized Mazda Dealer.
See also:
HomeLink Wireless Control System
NOTE:
HomeLink and HomeLink house are registered
trademarks of Johnson Controls.
The HomeLink system replaces up to 3
hand-held transmitters with a single builtin
component in the auto-dimming ...
Registering Your Vehicle in A Foreign Country (Except United States and
Canada)
Government regulations in your country could require that automobiles meet
specific
emission and safety standards.
Vehicles built for your country may differ from those built for other countries. ...
Introduction
Be extremely careful and prevent injury to yourself and others or damage to
your vehicle
when using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, w ...


