Accessory Sockets

The ignition switch must be in the ACC or ON position.

Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).

The accessory socket is in the center console.

Type A
Type A

Type B
Type B

CAUTION:
To prevent accessory socket damage or electrical failure, pay attention to the following:
more than 120 W (DC 12 V, 10 A). Do not use accessories that require
more than 120 W (DC 12 V, 10 A).

genuine Mazda accessories or the Do not use accessories that are not
genuine Mazda accessories or the equivalent.

socket is not in use to prevent Close the cover when the accessory
socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.

accessory socket. Correctly insert the plug into the
accessory socket.

into the accessory socket. Do not insert the cigarette lighter
into the accessory socket.

Noise may occur on the audio playback or TV reception depending on the device connected to the accessory socket.

NOTE:
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.

    See also:

    Parking in an Emergency
    The hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that t ...

    Immobilizer System (with Advanced Key)
    The immobilizer system allows the engine to start only with an advanced key the system recognizes. If someone attempts to start the engine with an unrecognized advanced key, the engine will not s ...

    Specifications
    Engine Electrical System *1 ex factory NOTE: When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged. ...