Brake/Clutch Fluid
Inspecting Brake/Clutch Fluid Level
The brakes and clutch draw fluid from the same reservoir.
Inspect the fluid level in the reservoir regularly. It should be kept at MAX.
The level normally drops with accumulated distance, a condition associated with wear of brake and clutch linings. If it is excessively low, have the brake/clutch system inspected by an Authorized Mazda Dealer.
2.5-liter engine
3.7-liter engine
Adding Brake/Clutch Fluid
WARNING:
Be careful not to spill brake fluid on
yourself or on the engine:
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with
water and get medical attention.
Brake fluid spilled on a hot engine could cause a fire.
If the brake/clutch fluid level is low, have the brakes and clutch inspected: Low brake/clutch fluid levels are dangerous. Low levels could signal brake lining wear or a brake system leak. Your brakes could fail and cause an accident.
If the fluid level is low, add fluid until it reaches MAX.
Before adding fluid, thoroughly clean the area around the cap.
CAUTION:
Brake and clutch fluid will
damage painted surfaces. If brake
or clutch fluid does get on a
painted surface, wash it off with
water immediately.
Using nonspecified brake and
clutch fluids will
damage the systems. Mixing
different fluids will also damage
them.
If the brake/clutch system frequently requires new fluid, consult an Authorized Mazda Dealer.
See also:
SRS Air Bag Deployment Criteria
This chart indicates the applicable SRS equipment that will deploy depending
on the type of collision.
(The illustrations are the representative case of collisions.)
X: The SRS air bag equipment ...
Driving Impressions
The Mazda6 is pleasant to drive and sportier than some of its rivals. This
sedan takes curves confidently with modest body lean and satisfying grip.
Moderate steering effort is accompanied by good ...
In Case of an Emergency
Helpful information on what to do in an emergency. ...


