Hazard Warning Flasher
The hazard warning lights should always be used when you stop on or near a roadway in an emergency.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Depress the hazard warning flasher and all the turn signals will flash.
NOTE:
- The turn signals do not work when the
hazard warning lights are on.
- Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.
See also:
Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the co ...
Rocking the Vehicle
WARNING:
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning
the wheels at high sp ...
Going & Stopping
Mazda reportedly may offer a more fuel-efficient, normally aspirated
four-cylinder engine in the CX-7 down the line, but until then, the only
available drivetrain is a 244-horsepower, turbocharged ...


