Beep Sounds

qSeat Belt Warning Beep

If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds.

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.

Refer to Seat Belt Warning Light/Beep on.

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.

NOTE:
When the advanced keyless function is used and the start knob is in the ACC position, the Start Knob Not in Lock Warning Beep overrides the lights-on reminder.

Tire Inflation PressureWarning Beep

The warning beep sound will be heard for about 3 seconds if the tire pressures decrease.

If the tire pressure decreases extremely, a beep sound will be heard for approximately 30 seconds.

Refer to Tire Pressure Monitoring System.

Advanced KeylessWarning (with Advanced Key)

Warning indicators for the advanced key, such as “the advanced key removed from vehicle warning”, use a beep sound and warning/indicator lights in the instrument cluster.

Refer to Warning and Beep Sounds .

    See also:

    Seat Belt Extender
    If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer. This extender will be only for you and ...

    In Case of an Emergency
    Helpful information on what to do in an emergency. ...

    Center-Rear Position Seat Belt (3-Point Type)
    Before using the center-rear lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened. Fastening the Seat Belt 1. Grasp the tongue (C). 2. Slowly pull out the lap/shoulder be ...