Brake Fluid
Inspecting Brake Fluid Level
Inspect the fluid level in the reservoir regularly. It should be kept at MAX.
The level normally drops with accumulated distance, a condition associated with wear of brake linings. If it is excessively low, have the brake system inspected by an Authorized Mazda Dealer.
Adding Brake Fluid
WARNING:
Be careful not to spill brake fluid on
yourself or on the engine:
Spilled brake fluid is dangerous. If it
gets in your eyes, they could be
seriously injured. If this happens,
immediately flush your eyes with
water and get medical attention.
Brake fluid spilled on a hot engine could cause a fire.
If the brake fluid level is low, have the
brakes inspected:
Low brake fluid levels are dangerous.
Low levels could signal brake lining wear or a brake system leak. Your brakes could fail and cause an accident.
If the fluid level is low, add fluid until it reaches MAX.
Before adding fluid, thoroughly clean the area around the cap.
CAUTION:
Brake fluid will damage painted
surfaces. If brake fluid does get on
a painted surface, wash it off with
water immediately.
Using nonspecified brake fluids will damage the
system. Mixing different fluids will
also damage it.
If the brake system frequently requires new fluid, consult an Authorized Mazda Dealer.
See also:
Features
When you test cars for a living, it's easy to fall for them from the driver's
seat. Testing a new Mercedes or even a new Toyota can be great — until you see
the price. Yes, we get sticker shock, t ...
Introduction
Be extremely careful and prevent injury to yourself and others or damage to
your vehicle
when using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, w ...
Going & Stopping
The new Mazda6 is available with one of two engines, and both offer capable
performance for what they are. The base engine is a 2.5-liter four-cylinder that
produces 170 horsepower (a cleaner vers ...