Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.

*1: When the autolock function is operating, the warning sound will be heard


*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.

*2: When Autolock function is enabled, windows will not automatically close. You must close before leaving vehicle.

    See also:

    Operating Tips
    Operating the Climate Control System Operate the climate control system with the engine running. NOTE: To prevent the battery from being discharged, do not leave the fan control dial on for a lo ...

    Starting a Flooded Engine
    If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within five seconds on the first try, turn the key to the LO ...

    Center-Rear Position Seat Belt
    Before using the center-rear lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened. Fastening the Seat Belt 1. Grasp the tongue (C). 2. Slowly pull out the lap/shoulder be ...