Keys
WARNING.
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
NOTE.
- Refer to Immobilizer System for information regarding keys and engine starting.
- (With theft-deterrent system) Refer to Theft-Deterrent System for information regarding keys and the prevention of vehicle and vehicle contents theft.
The keys operate all locks.
A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key.
NOTE.
- Write down the code number and keep it in a separate safe and convenient place, but not in the vehicle.
If your key is lost, consult your Authorized Mazda Dealer and have your code number ready.
- Some types of key chains cannot be attached to the retractable type key. In this case, use the key ring provided with the transmitter which has the key code number plate attached.
Key extend/retract method (Retractable type key)
To extend the key, press the release button.
To retract the key, rotate it into the holder while pressing the release button.
See also:
New for 2011
The headlights and fog lamps get a new design, and there is a new design for
the 17-inch alloy wheels. Mazda says fuel economy has improved on the "i" and
"s" models. Other cha ...
Beep Sounds
Air Bag/Front Seat Belt Pretensioner System Warning Beep
If a malfunction is detected in both the air
bag/front seat belt pretensioner system
and the warning light, a warning beep
sound will be he ...
Fog Lights
Use this switch to turn on the fog lights.
They help you to see as well as to be seen.
To turn the fog lights on, rotate the fog
light switch to the position.
The headlight switch must be in th ...