Setting Change (Function Customization)

The following function settings are possible. These settings can only be


The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.

*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.

*2: When the autolock function is enabled, windows will not automatically close. You must close them before leaving vehicle.

    See also:

    Audio Control Switch Operation (Steering Wheel)
    * Some models. When the audio unit is turned on, operation of the audio unit from the steering wheel is possible. For navigation system equipped vehicles, refer to the separate manual “NAVIGATIO ...

    Location of the Tire Label (Placard)
    You will find the tire label containing tire inflation pressure by tire size and other important information on the driver's side B-pillar or on the edge of the driver's door frame. SAMPLE Re ...

    Seat Belt Warning Light/Beep
    The seat belt warning light illuminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition switch is turned to the ON position. Conditions of operation ...