Accessory Sockets

The ignition switch must be in the ACC or ON position.

Only use genuine Mazda accessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A).

The accessory socket is in the center console.

Type A
Type A

Type B
Type B

CAUTION:
To prevent accessory socket damage or electrical failure, pay attention to the following:
more than 120 W (DC 12 V, 10 A). Do not use accessories that require
more than 120 W (DC 12 V, 10 A).

genuine Mazda accessories or the Do not use accessories that are not
genuine Mazda accessories or the equivalent.

socket is not in use to prevent Close the cover when the accessory
socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.

accessory socket. Correctly insert the plug into the
accessory socket.

into the accessory socket. Do not insert the cigarette lighter
into the accessory socket.

Noise may occur on the audio playback or TV reception depending on the device connected to the accessory socket.

NOTE:
To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.

    See also:

    Safety
    Like all Mazda vehicles, Mazda Tribute has always offered high levels of passive and active safety. The new facelift version enhances this with new disc brakes in the rear, replacing the rear brak ...

    Exterior Care
    Follow all label and container directions when using a chemical cleaner or polish. Read all warnings and cautions. Maintaining the Finish Washing CAUTION: When the wiper lever is in the AUTO po ...

    Brake/Clutch Fluid
    Inspecting Brake/Clutch Fluid Level The brakes and clutch draw fluid from the same reservoir. Inspect the fluid level in the reservoir regularly. It should be kept at MAX. The level normally drop ...