Rear Window Wiper and Washer
The ignition switch must be in the ON position.
Rear WindowWiper
Turn the wiper on by turning the rear wiper/washer switch.
ON ― Normal.
INT ― Intermittent.
Rear WindowWasher
To spray washer fluid, turn the rear wiper/
washer switch to the 
position. After
the switch is released, the washer will
stop.
If the washer doesn't work, inspect the fluid level. If it's OK and the washer still doesn't work, consult an Authorized Mazda Dealer.
See also:
Rocking the Vehicle
WARNING:
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow
anyone to stand behind a wheel when
pushing the vehicle:
When the vehicle is stuck, spinning
the wheels at high sp ...
Operating Tips
Operating the Climate Control
System
Operate the climate control system with
the engine running.
NOTE:
To prevent the battery from being discharged,
do not leave the fan control dial on for a lo ...
Washer Fluid
InspectingWasher Fluid Level
WARNING:
Use only windshield washer fluid or
plain water in the reservoir:
Using radiator antifreeze as washer
fluid is dangerous. If sprayed on the
windshield, it w ...