Mirrors
Outside Mirrors
Check the mirror angles before driving.
Mirror type
Flat type (driver's side)
Flat surface mirror.
Convex type (front passenger side)
The mirror has single curvature on its surface.
WARNING:
Be sure to look over your shoulder before changing lanes:
Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is dangerous. You could have a serious accident. What you see in the convex mirror is closer than it appears.
Power mirror
The ignition switch must be in the ACC or ON position.
To adjust:
1. Press the left or right side of the selector switch to choose the left or right side mirror.
2. Depress the mirror switch in the appropriate direction.
After adjusting the mirror, lock the control by placing the selector switch in the middle position.
Folding the mirror
Fold the outside mirror rearward until it is flush with the vehicle.
WARNING:
Always return the outside mirrors to the driving position before you start driving:
Driving with the outside mirrors folded in is dangerous. Your rear view will be restricted, and you could have an accident.
Rearview Mirror
WARNING:
Do not stack cargo or objects higher than the seatbacks:
Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror to center on the scene through the rear window.
Manual day/night mirror
Auto-dimming mirror
NOTE:
For the manual day/night mirror, perform the adjustment with the day/night lever in the day position.
Reducing glare from headlights
Manual day/night mirror
Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from cars at the rear.
Auto-dimming mirror
The auto-dimming mirror automatically reduces glare of headlights from cars at the rear when the ignition switch is in the ON position.
Press the OFF button (o) to cancel the automatic dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the ON button (l). The indicator light will illuminate.
NOTE:
- Do not use glass cleaner or suspend objects on or around the light sensor. Otherwise, light sensor sensitivity will be affected and may not operate normally.
- For information regarding the 3 buttons (,
,
) on the auto-dimming
mirror, refer to HomeLink Wireless Control System.
See also:
Beep Sounds
Air Bag/Front Seat Belt Pretensioner System Warning Beep
If a malfunction is detected in both the air
bag/front seat belt pretensioner system
and the warning light, a warning beep
sound will be he ...
Pedestrian Protection
Mazda 6 facelift has an energy-absorbing space between the bonnet and the
engine, and structures for impact energy absorption in the cowl grille and
fender brackets, which mitigate the chance of s ...
Distributor in Each Area
qCANADA
Mazda Canada Inc.
55 Vogell Road, Richmond Hill,
Ontario, L4B 3K5 Canada
TEL: 1 (800) 263-4680 (in Canada).
(905) 787-7000 (outside Canada)
PUERTO RICO/U.S. Virgin Island
Plaza Motors C ...