Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit: (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400_ 750 (5 × 150) = 650 lbs.).
(5) Determine the combined weight of luggage and cargo being loaded on vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
See also:
Center-Rear Position Seat Belt (3-Point Type)
Before using the center-rear lap/shoulder
belt make sure tongue (A) and anchor
buckle (B) are fastened.
Fastening the Seat Belt
1. Grasp the tongue (C).
2. Slowly pull out the lap/shoulder be ...
Changing a Flat Tire
NOTE:
If the following occurs while driving, it could
indicate a flat tire.
- Steering becomes difficult.
- The vehicle begins to vibrate excessively.
- The vehicle pulls in one direction.
If yo ...
Starting the Engine
With advanced key
Refer to “Starting the engine”
for information on how to start the engine.
NOTE:
Engine-starting is controlled by the spark
ignition system.
This system meets all Canadian Inte ...