Turn and Lane-Change Signals

Turn Signal

Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.

If the indicator light continues to flash after a turn, manually return the lever to its original position.

Green indicators on the dashboard show


Green indicators on the dashboard show which signal is working.

Lane-change signals

Move the lever slightly toward the direction of the change ―until the indicator flashes― and hold it there. It will return to the off position when released.

NOTE:
- If an indicator light stays on without flashing or if it flashes abnormally, one of the turn signal bulbs may be burned out.

- A personalized function is available to change the number of flashes.Refer to Personalization Features.

- A personalized function is available to change the turn indicator sound volume.Refer to Personalization Features.

    See also:

    Spare Tire and Tool Storage
    Spare Tire and Tool Storage Spare tire and tools are stored in the locations illustrated in the diagram. 5 Door (Type A) (Type B) Jack To remove the jack 1. Turn the knob and remove the ...

    Safety
    Like all Mazda vehicles, Mazda Tribute has always offered high levels of passive and active safety. The new facelift version enhances this with new disc brakes in the rear, replacing the rear brak ...

    Rocking the Vehicle
    WARNING: Do not spin the wheels at more than 56 km/h (35 mph), and do not allow anyone to stand behind a wheel when pushing the vehicle: When the vehicle is stuck, spinning the wheels at high sp ...