Introduction
Be extremely careful and prevent injury to yourself and others or damage to
your vehicle
when using this manual for inspection and maintenance.
If you're unsure about any procedure it describes, we strongly urge you to have
a reliable
and qualified service shop perform the work, preferably an Authorized Mazda
Dealer.
Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.
Without this expertise and the parts that have been designed and made especially
for your
Mazda, inadequate, incomplete, and insufficient servicing may result in
problems. This
could lead to vehicle damage or an accident and injuries.
For expert advice and quality service, consult an Authorized Mazda Dealer.
The owner should retain evidence that proper maintenance has been performed as prescribed.
Claims against the warranty resulting from lack of maintenance, as opposed to
defective
materials or authorized Mazda workmanship, will not be honored.
Any auto repair shop using parts equivalent to your Mazda's original equipment
may
perform maintenance. But we recommend that it always be done by an Authorized
Mazda Dealer using genuine Mazda parts.
See also:
Tire Pressure Monitoring System
* Some models.
The tire pressure monitoring system (TPMS) monitors the pressure for each
tire.
If tire pressure is too low in one or more tires, the system will inform the
driver via the
warnin ...
Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit:
(1) Locate the statement “The combined weight of occupants and cargo should
never exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the co ...
Enhanced Fuel Efficiency
Despite an increase in performance feel for the top grade powertrain, and the
same power and torque output as before, the Mazda MX-5 facelift MZR-2.0-litre
engine with manual transmission uses les ...


