Beep Sounds
Seat Belt Warning Beep
If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds.
If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.
Refer to Seat Belt Warning Light/Beep on.
Ignition Key Reminder
If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver's door is opened.
Lights-On Reminder
If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.
Tire Inflation PressureWarning Beep
* Some models.
The warning beep sound will be heard for about 3 seconds when there is any abnormality in tire inflation pressures.
See also:
Scheduled Maintenance (Mexico)
Follow Schedule 1 if the vehicle is operated mainly where none of the
following conditions
apply.
- Repeated short-distance driving.
- Driving in dusty conditions.
- Driving with extended use of ...
Accessory Sockets
The ignition switch must be in the ACC
or ON position
Only use genuine Mazda accessories or
the equivalent requiring no greater than
120 W (DC 12 V, 10 A).
Front (Type A)
Front (Type B)
R ...
Rear
1. Trunk lid.
2. Rear window antenna.
3. Child safety lock.
4. Outside mirror.
5. Tires.
6. Light bulbs. ...