Reporting Safety Defects (U.S.A.)
If you believe that your vehicle has a defect which could cause a crash or
could
cause injury or death, you should immediately inform the National Highway
Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor
Corporation (Your Mazda Importer/Distributor).
If NHTSA receives similar complaints, it may open an investigation, and if it
finds that a safety defect exists in a group of vehicles, it may order a recall
and
remedy campaign. However, NHTSA cannot become involved in individual
problems between you, your dealer, or Mazda Motor Corporation (Your Mazda
Importer/Distributor).
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888- 327-4236 (TTY:1-800-424-9153) ; go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http:// www.safercar.gov.
NOTE:
If you live in the U.S.A., all correspondence to Mazda Motor Corporation should
be forwarded to:
Mazda North American Operations 7755 Irvine Center Drive Irvine, California 92618-2922
or
P.O. Box 19734
Irvine, CA 92623-9734
Customer Assistance Center or toll free at 1 (800) 222-5500
If you live outside of the U.S.A., please contact the nearest Mazda
Distributor shown in
this booklet.
See also:
Changing a Tire
WARNING:
Be sure to follow the directions for
changing a tire, and never get under a
vehicle that is supported only by a jack:
Changing a tire is dangerous if not
done properly. The vehicle can s ...
Power steering, suspension and brake systems
To deliver just the right balance between fuel economy, light steering-wheel
operation and a feeling of stability, all configurations of the all-new Madza3
are equipped with the Electro-Hydraulic ...
Tire Pressure Monitoring System
The tire pressure monitoring system (TPMS) monitors the pressure for each
tire.
If tire pressure is too low in one or more tires, the system will inform the
driver via the
warning light in the i ...


