Windshield Wipers

Turn the wipers on by pulling the lever


Turn the wipers on by pulling the lever down.

INT ― Intermittent LO ― Low speed
HI ― High speed
For a single wiping cycle, push the lever up to MIST.

MIST ― Mist

Windshield Washer

Pull the lever toward you and hold it to


Pull the lever toward you and hold it to spray washer fluid.

NOTE:
With the wiper lever in the OFF or INT position, the wipers will operate continuously until the lever is released.

If the washer does not work, inspect the fluid level. If it's normal, consult an Authorized Mazda Dealer.

    See also:

    Jump-Starting
    Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do t ...

    SRS Air Bag Deployment Criteria
    This chart indicates the applicable SRS equipment that will deploy depending on the type of collision. (The illustrations are the representative case of collisions.) X: The SRS air bag equipment ...

    Starting a Flooded Engine
    If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within five seconds on the first try, turn the key to the LO ...