Beep Sounds

qSeat Belt Warning Beep

If the driver's seat belt is not fastened when the ignition switch is turned to the ON position, a beep sound will be heard for about 6 seconds.

If the driver's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.

Refer to Seat Belt Warning Light/Beep on.

Ignition Key Reminder

If the ignition switch is in the LOCK or ACC position with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Lights-On Reminder

If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.

NOTE:
When the advanced keyless function is used and the start knob is in the ACC position, the Start Knob Not in Lock Warning Beep overrides the lights-on reminder.

Tire Inflation PressureWarning Beep

The warning beep sound will be heard for about 3 seconds if the tire pressures decrease.

If the tire pressure decreases extremely, a beep sound will be heard for approximately 30 seconds.

Refer to Tire Pressure Monitoring System.

Advanced KeylessWarning (with Advanced Key)

Warning indicators for the advanced key, such as “the advanced key removed from vehicle warning”, use a beep sound and warning/indicator lights in the instrument cluster.

Refer to Warning and Beep Sounds .

    See also:

    Convenient Use of the Hands-Free System
    qPhone book usage Phone book registration Phone numbers can be registered to the Bluetooth Hands-Free phone book. NOTE: Do this function only when parked. It is too distracting to attempt while ...

    Emission Control System
    Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements. WARNING ...

    Engine Compartment Overview
    Engine Compartment Overview ...