Before Getting In

- Be sure the windows, outside mirrors, and outside lights are clean.

- Inspect inflation pressures and condition of tires.

- Look under the vehicle for any sign of fluid leaks.

- If you plan to back up, make sure nothing is in your way.

NOTE:
Engine oil, engine coolant, brake/clutch fluid, washer fluid, and other fluid levels should be inspected. See Maintenance, Section 8.

    See also:

    Manual Type
    Control Switches Temperature control dial This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold. Fan control dial Turn the dial to adjust to the desired f ...

    Automatic Transaxle Fluid (ATF)
    Inspecting Automatic Transaxle Fluid Level The automatic transaxle fluid level should be inspected regularly. Measure it as described below. 2.5-liter engine CAUTION: Always check the automati ...

    Fuel Requirements
    Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fu ...