Keys (without Advanced Key)
WARNING:
Do not leave the key in your vehicle
with children and keep them in a place
where your children will not find or
play with them:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. Children may find these new
kinds of keys to be an interesting toy
to play with and could cause the
power windows or other controls to
operate, or even make the vehicle
move.
NOTE:
- Refer to Immobilizer System for
information regarding keys and engine
starting.
- (With theft-deterrent system).
Refer to Theft-Deterrent System for information regarding keys and the prevention of vehicle and vehicle contents theft.
The keys operate all locks.
With keyless entry system
Without keyless entry system
A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key.
NOTE:
- Write down the code number and keep it in
a separate, safe and convenient place, but
not in the vehicle.
If your key is lost, consult your Authorized Mazda Dealer and have your code number ready.
- Some types of key chains cannot be attached to the retractable type key. In this case, use the key ring provided with the transmitter which has the key code number plate attached.
Key extend/retract method (Retractable type key)
To extend the key, press the release button.
To retract the key, rotate it into the holder while pressing the release button.
See also:
Chassis Updates
The third generation was launched with a stiffer and lighter body shell than
the second-generation Mazda MX-5 it replaced. The facelift version carries on
this tradition: it has high flexural and ...
Specifications
Engine
Electrical System
*1 ex factory
CAUTION.
When cleaning the iridium plugs, do not use a wire brush. The fine particulate
coating on the iridium alloy and platinum tips could be damaged. ...
Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Jack
To remove the jack
1. Remove the cover.
2. Turn the wing bolt and jack screw
counterclockwise.
To secure t ...