Setting Change (Function Customization)

The following function settings are possible. These settings can only be


The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.

*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.

*2: When the autolock function is enabled, windows will not automatically close. You must close them before leaving vehicle.

    See also:

    Exterior Overview
    Exterior Overview 1 - Rear window defroster 2 - Rear wiper blade 3 - Light bulbs 4 - Liftgate 5 - Antenna 6 - Fuel-filler lid 7 - Sliding doors 8 - Power windows 9 - Outside mirror 10 - Ch ...

    Hazardous Driving
    WARNING: Be extremely careful if it is necessary to downshift on slippery surfaces: Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed ...

    Starting a Flooded Engine
    If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within five seconds on the first try, turn the key to the LO ...