Audio Control Switch Operation (Steering Wheel)

When the audio unit is turned on, operation of the audio unit from the steering wheel is possible.

NOTE:
Because the audio unit will be turned off under the following conditions, the switches will be inoperable.

- When the ignition switch is turned to the LOCK position.

- When the power button on the audio unit is pressed and the audio unit is turned off.

- When the CD being played is ejected and the audio unit is turned off.

NOTE:


NOTE:
Mazda has installed this system to prevent distraction while driving the vehicle and using audio controls on the dashboard.

Always make safe driving your first priority.

Adjusting the Volume

To increase the volume, press the volume


To increase the volume, press the volume button (+).

To decrease the volume, press the volume button (-).

Changing the Source

Press the mode switch () to


Press the mode switch (change) to
change
the audio source (FM1 radio> FM2 radio> AM radio> CD player or CD changer> SIRIUS1> SIRIUS2> SIRIUS3> AUX> cyclical).

NOTE:
CD, CD changer and SIRIUS digital satellite radio modes cannot be selected in the following cases:
· CD, CD changer, or SIRIUS digital satellite radio unit is not equipped on the audio system.

· CD has not been inserted.

Connect a portable audio unit or similar product on the market to the auxiliary jack to listen to music or audio over the vehicle's speakers. Change the audio source to AUX mode.

Seek Switch

When listening to the radio or SIRIUS


When listening to the radio or SIRIUS digital satellite radio

Press the seek switch (the radio,the radio),
the radio
switches to the next/previous stored station in the order that it was stored (1―6).

Press the seek switch (for about 2,for about 2)
for about 2
seconds until a beep sound is heard to seek all usable stations at a higher or lower frequency whether programmed or not.

When playing a CD

Press the seek switch (skip to the) to
skip to the
next track.

Press the seek switch (repeat the) to
repeat the
current track.

Mute Switch

Press the mute switch (to mute) once
to mute
audio, press it again to resume audio output.

NOTE:
If the ignition switch is turned to the LOCK position with the audio muted, the mute will be canceled.

Therefore, when the engine is restarted, the audio is not muted. To mute the audio again, press the mute switch (

).


AUX Mode (Auxiliary input)


    See also:

    Tire Pressure Monitoring System
    The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the ...

    Exterior & Styling
    Technically the same generation as the 2008, the 2009 model's restyling is definitely noticeable, as the nose extends lower and the grille is now larger and smile-shaped. Unlike the Mazda3, this s ...

    Fuel Requirements
    Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Your Mazda will perform best with fu ...